Lentinus edodes do not take off the bag-cut holes on the shelf and arrange the bags to produce mushrooms.

Lentinus edodes is the second largest edible fungus in the world and one of China's specialties. It is known as "Shanzhen" among the people. Lentinus edodes do not take off the bag, cut the hole, and arrange the mushroom on the shelf. The method is more common in small shed and big bag mushroom breeding, which can advance the flower drum rate and economic benefits.

Mushrooms do not take off the bag, cut the hole, rack and row the mushroom method is more common in the small shed and large bag mushroom breeding method, which can advance the flower drum rate and economic benefits. The flower mushroom is a kind of special deformed mushroom formed under specific environmental conditions. The more crack, deep, wide and white the better.

Mushrooms do not take off the bag, cut the hole, arrange the bag on the shelf, and discharge the mushroom method.

1. Draining wet buds: When most mushroom buds grow to 0.5-2cm, the plants will be fixed at the end of the day. Only the mushroom buds with a diameter of 0.8-1.5cm are retained. Stop spraying water, gradually increase the amount of ventilation and moisture removal within 1-2 days, and let the free water on the surface of the mushroom bud transpiration. When the surface of the mushroom bud is slightly bright and smooth, and when the surface of the mushroom bud is slightly elastic, the bud is over. If the dehumidification is excessive, the surface of the mushroom bud will appear cardboard, which is not conducive to flower urging.

2. Flower urging method: when the diameter of the cap reaches 2 ~ 75px, flower urging can be carried out. Reduce the humidity to 60% control, open the film, strong ventilation, strong light and increase the temperature and humidity difference, prompting the surface of the cover to crack. Do not spray water, pay attention to prevent moisture, to ensure that the markings are white.

Specific methods: uncover the film during the day to cool down and reduce humidity, drop below 15 ℃ in a short period of time, let the sun shine directly and the natural monotonous breeze circulate, and cover the film in the evening to heat up and increase humidity. The most common heating methods are lighting to cover up plastic film, heat conduction from coal stove outside the shed to the shed through air pipe, heat conduction from heat pipe at the bottom of the shed, and heat and humidity fan warming to gradually raise the temperature in the mushroom shed to 24-32 ℃ within 8-12 hours (15 minutes to control when the temperature rises to 24 ℃) and persist for 2-4 hours (during the warming period, oxygen consumption of mushroom mycelium is added, and staff should pay attention to hypoxia and suffocation). During the whole warming process, the humidity in the shed should be 45%-65%, and should not exceed 70%. Such a large temperature and humidity difference and strong light affect 3 to 4 days, you can push out the markings. This method is moderately grasped (the underground in the shed does not transpiration upward and moisten). Before the shed is opened for ventilation, some mushroom buds have cracked and blossomed, and excellent mushrooms can be bred.